SEAWALLS, GIRDERS & SHAPES
Custom FRP Shapes: Composite Shells, Forms & Components Built to Fit
When a standard product doesn't fit, QuakeWrap® designs and manufactures custom FRP shells, pipe systems and specialty components for the structure you need to repair.
- Made to any dimension and shape
- Manufactured by QuakeWrap®
- Data sheets for your engineer

WHAT WE MAKE
Custom FRP Products for Structures That Don't Fit a Standard Size
In addition to standard products, QuakeWrap® manufactures custom-fabricated composite shells, pipe systems and specialty components using advanced resin infusion. Each one is shaped to the structure it will repair, then supported by the same team that developed PileMedic®, SPiRe®+ and StifPipe®.
-

Custom FRP Shells
Shells for piles, columns, decks and beams with non-standard or irregular profiles.
Pile repair -
Custom StifPipe® Profiles
Structural liners built to any diameter or shape, including non-circular culverts.
StifPipe® -

SPiRe®+ Panels in Custom Geometries
Stay-in-place FRP panels supplied in the shapes a seawall, pile or beam needs.
SPiRe®+ -
Custom FRP Fabrics
Special fabrics designed for strength in both hoop and longitudinal directions.
Wet & dry layup -
Composite & Steel Components
Specialty parts such as carbon-fiber bridges for rail inspection trolleys, plus steel fabrication.
Manufacturing
Have a structure with an unusual shape?
Send the geometry and conditions. Our team will recommend a custom QuakeWrap® product that fits.
REUSABLE FRP FORMS
FRP Laminate Form: One Roll, Forms of Any Shape and Size
Forming an existing column is hard. The floor and beams above it block a cardboard tube, so contractors assemble heavy segmented forms and hold them with bolts and clamps. FRP Laminate Form (FLF), developed by Prof. Mo Ehsani, does the job with one thin laminate.
FLF is a glass fiber and vinyl ester laminate supplied in rolls. A piece is cut from the roll and wrapped 2 to 3 times around the column, with QuakeWrap® spacers setting the annular space and holding the rebar in place. The pressure of the fresh concrete presses the layers together, and the friction between them holds the form. With 3 wraps, the external ties carry no load.
Changing the spacer size changes the form. The same roll builds circular, rectangular and oval forms around an existing column, or for a new one. The only limit is a corner radius of about 1 in. (25 mm).
After the concrete hardens, the laminate comes off, is washed and coiled for the next pour. It leaves a smooth finish with no spiral marks, and it is fully water resistant, so it can form submerged columns and piles. QuakeWrap® now offers this reusable laminate form as MoTubes™ (U.S. Patent 11,591,810).

FRP Laminate Form at a Glance
- MATERIAL
- Glass fiber and vinyl ester laminate
- THICKNESS
- 0.045 to 0.075 in. (1.1 to 1.9 mm)
- ROLL SIZE
- Up to 102 in. (2,590 mm) wide, typically 500 ft (152 m)
- WEIGHT
- 0.31 to 0.51 lb/ft² (1.5 to 2.5 kg/m²)
- BREAKING STRENGTH
- 600 lb/in. width (0.060 in. laminate)
- PRESSURE TEST
- 3,300 psf (158 kPa) on a 12-in. 3-ply tube, no damage
- SHAPES
- Circular, rectangular, oval; corner radius about 1 in. (25 mm)
- EXTERNAL TIES
- Carry no load with 3 wraps
- REUSE
- Tens of pours per laminate
| Property | Test standard | Value |
|---|---|---|
| Flexural strength | ASTM D790 | 1.91 × 10⁴ psi |
| Flexural modulus | ASTM D790 | 6.0 × 10⁶ psi |
| Tensile strength | ASTM D638 | 1.0 × 10⁴ psi |
| Tensile modulus | ASTM D638 | 5.2 × 10⁵ psi |
| Izod impact | ASTM D256 | 4.5 ft-lb/in. notched |
| Coefficient of linear thermal expansion | ASTM D696 | 1.7 × 10⁻⁵ in./in./°F |
| Water absorption, 24 hours | ASTM D570 | 0.3% at 77°F |
| Coefficient of static friction | 0.18 |
When a Custom Shape Makes Sense
-
Non-circular piles and columns
Rectangular, oval and other non-circular sections.
-
Irregular culvert profiles
Non-circular culverts and tunnels, with StifPipe® made to the profile.
-
Oversized pipes
Diameters beyond standard liners, up to 16 ft.
-
Corroded decks and beams
Custom-made shells, like the Port of Galveston deck repair.
-
Hard-to-reach locations
Columns under existing floors and beams, where a tube cannot slip over.
-
Underwater or splash zone
Water-resistant forms for submerged columns and piles.
-
Special load directions
Fabrics with strength where the design needs it.
-
Repeat repairs
Reusable forms for many columns or posts.
HOW IT WORKS
From Drawings to a Custom Product on Site
-
Share the geometry
Send drawings, dimensions, photos and site conditions.
-
Shape the product
Our team develops the shape, thickness and fiber layout with your engineer of record.
-
Manufacture
The product is made in QuakeWrap® and partner facilities, by resin infusion or pultrusion depending on the product.
-
Deliver & install
Product data sheets, installation guidance and support for your contractor.
PROVEN RESULTS
Custom Shape Projects
-

Port of Galveston, Texas
Custom-made shell for repair of a corroded marine deck.
View the project -

Detroit Sewer Interceptor
A 16-ft StifPipe® slipliner, likely the largest slipliner ever made.
View the project -

24-in. Steel Piles
Corroded over 12 ft. 14-ft Form-A-Tube® strips were joined into a 28-in. tube, strapped and filled with grout.
Watch the video
Engineered, tested and manufactured by QuakeWrap®
20+ patented technologies and more than 1,000 projects in 28 countries.
Custom FRP Shape FAQs
What shapes can QuakeWrap make?
Custom FRP shells, jackets, pipe liners, panels and specialty components, built to the dimensions and profile of the structure. StifPipe® alone has been made up to 16 ft in diameter. FRP Laminate Form builds circular, rectangular and oval column forms on site from a single roll.
Can custom forms and shells be used underwater?
Yes. FRP Laminate Form is fully water resistant and can form submerged columns and piles. PileMedic® laminates also install underwater, without cofferdams.
Can the forms be reused?
Yes. FRP Laminate Form comes off after the concrete hardens, is washed and coiled, and can be used tens of times for forms of the same or a different shape and size. Form-A-Tube® strips can also be reused as forms for new columns and posts.
What information do you need to quote a custom shape?
Send drawings, dimensions, photos and site conditions. Our team develops the shape, thickness and fiber layout with your engineer of record.
Do custom products come with data sheets and specifications?
Yes. Custom products come with product data sheets, installation guidance and support for your contractor.
Need a Shape We Don't Stock?
Tell us about the structure and its geometry. Our team will recommend the right custom QuakeWrap® product.